6. Measure the left margin of the test print.
If the left margin is 2 mm (0.08 inches), you do not have to adjust the registration. If the left margin is wider or narrower than 2 mm (0.08 inches), calculate the difference. Use this measurement to adjust the registration with the side registration adjustment dial.
Example
When the left margin is 2.8 mm
2.8mm – 2.0 mm = 0.8 mm (Decrease the margin by 0.8 mm.)
0.8mm ÷ 0.4 mm = 2 (Decrease the dial value by 2.)
7.For the example above, turn the dial from 5 to 3. Use a screwdriver or your hand to turn the dial.
8.Print another test print and check if the left margin is 2 mm (0.08 inches). If the margin is still not 2 mm (0.08 inches), repeat step 6 through step 8.
