IBM S544-5361-01 quick start Replacing the Fuser Access Door

Models: S544-5361-01

1 218
Download 218 pages 55.07 Kb
Page 103
Image 103

Replacing the Fuser Access Door

Use the following procedure to replace the fuser access door on the printer.

1.Make sure that the feeder access door is open.

2.Hold the fuser access door with the top edge pointing down and align the 2 pivots on the door with the 2 brackets on the frame (the door pivot on the right has a tab that aligns with the cutout [1] in the right bracket). Slide the door to the right and rotate it up.

3.Grasp the tab at the top of the strap on the fuser access door [1]. Insert the tab into the cutout in the printer frame [2] and slide the tab down until the top of the tab [3] aligns with the hole in the frame [4]. Push the tab into the hole in the frame and lock it in place.

Chapter 5. Replacing Supplies 5–29

Page 103
Image 103
IBM S544-5361-01 quick start Replacing the Fuser Access Door