Chapter 1. Welcome to the IBM Network Color Printer 1–13
Turning the Printer On and Off
This section tells you how to turn the printer on and off. When you turn the
printer and its connected devices on or of f , foll ow the procedure below.
Attention:
Never turn the printer on without a fuser oil bottle and a used toner bottle installed.

Turning the Printer On

Use the following procedure to turn on po wer to the printer.
1. Turn on any devices connected to the printer (such as a SCSI hard drive
or CD ROM).
2. Press the power switch to tu rn on the printer (the switch rem ains pressed).
3. Turn on the host computer.
Note: If you see an error message after you tur n on the printer, see
“Understanding POST Error M essages” on page 7–2 to learn wha t
to do.

Turning the Printer Off

Attention:
Never turn off the printer while it is printing. If power to the printer is accidentally lost,
open the paper jam clearance areas (see “Clearing Paper Jams” on page 6–3) and
remove any paper left inside before turning on the printer again.
Use the following procedure to turn of f po w er to the printer.
1. Turn off the host computer.
2. Turn off any devices connected to the printer (such as a SCSI hard drive
or CD ROM).
3. Press the power switch to turn off the p rint e r (the switch is released).