|
| POST Error Messages |
|
| |
Message | Suggested Action | |
|
| |
DRAM SIMM 310 | 1. Turn the printer off. Wait for 90 seconds. | |
| 2. | If this is the second time for this error, turn the printer off and |
|
| disconnect it from the wall outlet. Remove the controller and |
|
| reseat all memory SIMMs. (See the Quick Setup Guide for |
|
| details.) |
| 3. | Turn the printer on. If the message recurs, call for service and |
|
| report error DRAM SIMM 310. |
|
| |
DRAM SLOT 320 | 1. Turn the printer off. Wait for 90 seconds. | |
| 2. | Turn the printer on. If the message recurs, call for service and |
|
| report a DRAM SLOT 320 error. |
|
| |
DRAM CONFIG 330 or | 1. Turn the printer off. Wait for 90 seconds. | |
350 | 2. | Turn the printer on. If the message recurs, call for service and |
| ||
|
| report a DRAM CONFIG 330 or 350 error. |
|
| |
DRAM CONFIG D00 | 1. Turn the printer off. Wait for 90 seconds. | |
| 2. | Turn the printer on. If the message recurs, call for service and |
|
| report a DRAM CONFIG D00 error. |
|
|
|
DRAM 340 | 1. | Turn the printer off. Wait for 90 seconds. |
| 2. | Turn the printer on. If the message recurs, call for service and |
|
| report a DRAM 340 error. |
|
| |
ACA DMA CNFG B00 | 1. Turn the printer off. Wait for 90 seconds. | |
| 2. | Turn the printer on. If the message recurs, call for service and |
|
| report an ACA DMA CNFG B00 error. |
|
| |
ACA DMA ADR B10 | 1. Turn the printer off. Wait for 90 seconds. | |
| 2. | Turn the printer on. If the message recurs, call for service and |
|
| report an ACA DMA ADR B10 error. |
|
| |
ACA CNTL REG A00 | 1. Turn the printer off. Wait for 90 seconds. | |
| 2. | Turn the printer on. If the message recurs, call for service and |
|
| report an ACA CNTL REG A00 error. |
|
| |
ACA VADR REG 5A0 | 1. Turn the printer off. Wait for 90 seconds. | |
| 2. | Turn the printer on. If the message recurs, call for service and |
|
| report an ACA VADR REG 5A0 error. |
|
| |
ACA VCNT REG B50 | 1. Turn the printer off. Wait for 90 seconds. | |
| 2. | Turn the printer on. If the message recurs, call for service and |
|
| report an ACA VCNT REG B50 error. |
|
|
|
ETH FUSE 400 | 1. | Turn the printer off. Wait for 90 seconds. |
| 2. | Turn the printer on. If the message recurs, call for service and |
|
| report an ETH FUSE 400 error. |
|
| |
ETH QUIET 410 | 1. Turn the printer off. Wait for 90 seconds. | |
| 2. | Turn the printer on. If the message recurs, call for service and |
|
| report an ETH QUIET 410 error. |
|
|
|
ETH IDLE 420 | 1. | Turn the printer off. Wait for 90 seconds. |
| 2. | Turn the printer on. If the message recurs, call for service and |
|
| report an ETH IDLE 420 error. |
|
|
|
ETH SELF 450 | 1. | Turn the printer off. Wait for 90 seconds. |
| 2. | Turn the printer on. If the message recurs, call for service and |
|
| report an ETH SELF 450 error. |
|
|
|
Chapter 7. Understanding Operator Messages
