Top output tray (facedown) (open)
This tray holds approximately 100 sheets of plain paper at 80 g/m2.
Wire cleaner (stored inside the printer)
The wire cleaner is used to clean the separation corona wire (inside the separation corona unit) and the window of the density detection sensor. The wire cleaner looks like this:
Separation corona unit
The separation corona unit helps separate the printout from the photoconductor drum cartridge during the printing process. The wire is cleaned with the wire cleaner that is stored inside the printer.
Operator panel
The operator panel is on the outside of the printer’s front door. It has lights and push buttons that are used to control the printer and to indicate the printer’s status.
