Xerox 765, 665, 685 Line Selection, Transmitting Documents, Free memory, 100%, Enter fax number

Transmitting Documents

Line Selection

The Line Selection key allows you to select the line you want the WorkCentre to use when performing the current communication. The Line Selection can also be designated when setting Speed Dial or One Touch numbers for a remote party that requires this selection every time. (Refer to Chapter 2, “Setting up the Phonebook”.)

To manually select the line for the current job:

1.Load the document face down in the Document Tray.

2.If desired, select the Resolution and Contrast.

3.Press:

Line Select

Line selection

1.Either line

2.Line #1

3.Line #2

4. Select the line to be used for this job:

To select either line, press	.
To select Line 1, press	.
To select Line 2, press	.

Free memory:	100%
Enter fax number

Note: You may select another option for this job. Refer to the selected option for the procedure.

5.Using one of the dialing methods, enter the fax number and press Enter.

The document is scanned and sent using the line you selected.

5-10 WorkCentre Pro 665/685/765/785