Xerox 765, 665, 685, 785 manual Using the Power Save features, Using the ControlCentre

Using the ControlCentre

6Click Enable error correction mode - ECM to have the WorkCentre monitor the phone line for errors and, if an error occurs, resend any portion of the document until the transmission is complete. When using ECM, the fax transmission time can be longer, but the complete fax is sent.

7For telephone line 1, set the Answer mode:

Auto To have the WorkCentre automatically answer and receive incoming fax calls. Use Auto if you have a dedicated fax line. In the Rings to answer (1-10) box, enter the number of times the phone must ring before the WorkCentre answers the call.

Manual To answer incoming calls yourself. Use Manual if you have a single line for both voice and fax calls.

8For telephone line 2, set how the line is to be used for fax communications:

Send and receive To use the phone line to send and receive faxes.

Receive only To use the phone line to receive faxes only.

Receive during certain times To specify a time period for receiving faxes. Set the time period by selecting times in the Start receive and Stop receive time boxes.

9Click Apply to set the options at the WorkCentre.

Using the Power Save features

You use the Printer Power Save feature to turn off the printer heater during times of inactivity to reduce power consumption. You can also enable the Super Power Save feature, which turns off all power.

1Click the General icon and then click the Machine Setup tab.

2Click Use Printer Power Save.

3In the Use Super Power Save box, select one of the following options:

Automatic Begins Super Power Save after the period of inactivity set in the Minutes (1-60) box.

Manual Begins Super Power Save when the Power Save key is pressed on the WorkCentre control panel.

Off Disables Super Power Save.

4Click Apply to set the options at the WorkCentre.

15-4 WorkCentre Pro 665/685/765/785