Canon MultiPASSTM C50 manual Receiving Faxes Manually Manual Mode, If you hear a persons voice

Receiving Faxes Manually: MANUAL MODE

See page 5-3 to select Manual Mode.

To use this feature, the optional handset or a telephone must be plugged into the telephone jack of the MultiPASS C50. See ºConnecting the Optional Handset, a Telephone or Answering Machineº on page 2-17. You must also use the MultiPASS Desktop Manager to enable the REMOTE RX setting and select the two-digit ID code (the default code is 25). For details, see the MultiPASS Desktop Manager User's Guide.

If you use your MultiPASS C50 with MANUAL MODE, answer incoming calls as follows:

1. When the MultiPASS C50 rings, pick up the handset.

If you hear a person's voice:

2. Start your conversation. If the caller wants to send a document after talking to you, wait on the line until you hear a slow beep, then press START/COPY to begin receiving the document.

If you hear a slow beep or silence:

2. A fax machine is trying to send you a document.

Press START/COPY on the MultiPASS C50.

-or-

Ex:		Enter the two-digit ID code from the extension phone, then hang up.
2	5
		J The MultiPASS C50 then begins receiving the document. (This is

particularly convenient if your extension phone is located away from the MultiPASS C50.)

JIf you do not hang up after pressing the two-digit ID code, the unit beeps intermittently for a few seconds after you receive the document. (You can turn the beeping off by disabling the OFFHOOK ALARM from the Desktop Manager. See the MultiPASS Desktop Manager User's Guide for details.)

5-6 Receiving Faxes Chapter 5