Jams in the Sheet Feeder
Use this procedure if the recording paper jams or misfeeds in the sheet feeder. If this happens, the message CLEAR PAPER JAM appears in the display.
1. Gently pull any jammed paper out of the unit as shown.
2.Remove the paper stack from the sheet feeder and reload it, following the instructions in ºLoading Print Media for Automatic Feedº on page
J Make sure you push the paper to the back and right of the sheet feeder, and that the stack is not higher than the paper limit mark (
). See page
3.Press STOP to clear the error message.
J If the ALARM light is on, press the RESUME button to clear the error message.
J If you are printing from a Windows application, follow the instructions displayed by the software on your PC.
If the paper jam occurred while a fax was being received into the MultiPASS C50's memory, that fax will print automatically when the jam is cleared.
Troubleshooting | Chapter 8 |
