Connecting the Power Cord
Follow these guidelines when connecting your MultiPASS C50 to a power source:
J The MultiPASS C50 is intended for domestic use only and requires
JUse only the power cord that came with the unit. Using a longer cord or extension cord can cause the MultiPASS C50 to malfunction.
JUnplug the unit only by pulling on the plug itself. Never pull on the cord.
JDo not plug the MultiPASS C50 into an outlet shared with an appliance such as an air conditioner, computer, electric typewriter, or copier. These devices generate electrical noise, which can interfere with the MultiPASS C50's operation.
JMake sure nothing is laying on the power cord, and that the cord cannot be walked on or tripped over.
JDo not overload the electrical outlet. Make sure the total amperage used by all the machines plugged into the outlet does not exceed the ampere rating of the outlet's circuit breaker.
JMake sure the operation panel of the MultiPASS C50 is properly closed, and that there are no documents in this area.
Connect the power cord as follows:
1.Plug the supplied power cord into the power receptacle on the MultiPASS C50.
| Chapter 2 |