Choosing a Location for Your MultiPASS C50
Before unpacking your MultiPASS C50, follow these guidelines to choose the best location for it.
Please review the information provided in ºSafety Instructionsº on page
JPut the MultiPASS C50 in a cool, dry, clean, well ventilated place:
I Make sure the area is free from dust.
IMake sure the location is not affected by extreme temperature changes, and always stays between 10! and 32.5!C.
IMake sure the area's relative humidity is always between 10% and 90%.
JKeep the MultiPASS C50 away from direct sunlight.
JIf possible, put the MultiPASS C50 near an existing telephone outlet, to avoid the expense of installing a new one.
JPlace the unit near a standard
JPlace the MultiPASS C50 near the PC you will be connecting it to. Make sure you can reach it easily, as you will be using it as a printer, fax machine, copier, scanner, and telephone.
JDo not plug the MultiPASS C50 into the same circuit as an appliance such as an air conditioner, electric typewriter, television, or copier. Such devices generate electrical noise that can interfere with your MultiPASS C50's ability to send or receive faxes.
JSet the MultiPASS C50 on a ¯at, stable,
JMake sure the location you choose provides enough space around the MultiPASS C50 for adequate ventilation, and to allow paper to ¯ow freely into and out of the unit. The ®gure below shows the minimum space required for the unit.
Chapter 2 | Setting Up Your MultiPASS C50 |
