2. Plug the other end of the power cord into the outlet.
The MultiPASS C50 has no power switch, so its power is on as long as it is plugged in. Once connected, though, the unit still needs to warm up before you can use it. Depending on the number of pages accumulated in its memory, the MultiPASS C50 can take up to four minutes to warm up.
JWhile the MultiPASS C50 is warming up, the message PLEASE WAIT appears in the LCD display:
PLEASE WAIT
JWhen the time and receive mode appear, the MultiPASS C50 is in standby mode and ready for use:
13:30 FaxOnly
If the BJ cartridge has not been installed yet, the message PUT IN CARTRIDGE alternates with the standby mode display:
PUT IN CARTRIDGE
13:30 FaxOnly
Chapter 2 | Setting Up Your MultiPASS C50 |