Attaching the Document Support
The document support catches documents as they come out of the MultiPASS C50 after being faxed or scanned. You can operate the MultiPASS C50 with or without this support.
The ends of the metal support ®t into the slots on the front of the MultiPASS C50, as shown below. To install it, slightly squeeze the ends of the support toward each other, insert them in the slots, and gently release them. Then slide the support into the unit until it clicks in position.
When the support is installed, you can pull it out or push it in to suit the size of the document.
JWhen inserting the document support, make sure that it curves upwards, as shown in the ®gures above.
JIf you do not wish to use the support, you can remove it completely.
| Chapter 2 |
