Problem | Possible cause | Solution |
Output is faint | You may be using Draft print |
| quality or Fine mode. |
Try using Standard mode. See the MultiPASS Desktop Manager User's Guide.
Printing takes too much time | You may be using Fine mode. | Try using Standard mode. See the |
|
| MultiPASS Desktop Manager |
|
| User's Guide. |
|
|
|
The printout contains blurred | The medium you are using |
or smudged ink | may not be supported by the |
| MultiPASS C50. |
| You may be printing on the |
| wrong side of the paper. |
Use only print media speci®ed in ºSelecting the Print Mediaº on page
Many types of paper have a ºcorrectº side for printing. If your paper does, make sure that side is facing up. If the paper has no obvious correct side, try turning the paper over and printing on the other side.
Chapter 8 | Troubleshooting |
