Memory Sending
Memory sending is a quick and easy way to send a fax. When you use memory sending, the MultiPASS C50 scans the document into its memory as it dials the fax number. If the line is free, the MultiPASS C50 begins sending the fax as it scans the rest of the document.
The MultiPASS C50 has enough memory to store up to 42 pages (fewer if the document contains many graphics or particularly dense text).
Since the MultiPASS C50 is a multitasking device, you can use memory sending to scan one document into memory and at the same time send another fax, receive a fax, or print a document. Follow the instructions below to send a document with memory sending:
Be sure to adjust the document feed lever before loading your document. See page
1.Prepare the document and load it, face down, into the Automatic Document Feeder (ADF).
J Once the document is loaded, the LCD display shows the following:
MEMORY USED 0%
(Currently used image memory)
STANDARD
DOCUMENT READY
(Current resolution)
(Standby to scan)
JIf necessary, you can adjust the resolution and contrast. See page
JYou may not be able to use memory sending if the percentage shown in the MEMORY USED display is close to 100%. In this case, use manual sending via the handset to send your document.
| Chapter 4 |
