Safety Instructions
Read these safety instructions thoroughly before using your MultiPASS C50, and keep them handy in case you need to refer to them later.
Except as speci®cally described in this manual, do not attempt to service the MultiPASS C50 yourself. Never attempt to disassemble the unit: opening and removing its interior covers will expose you to dangerous voltages and other risks. For all service, contact your local authorised Canon dealer or the Canon help line.
JAlways follow all warnings and instructions marked on the MultiPASS C50.
JUse the MultiPASS C50 only on a sturdy, stable, level surface. If the MultiPASS C50 falls, it could be seriously damaged.
JDo not use the MultiPASS C50 near water. If you spill liquid on or into the unit, unplug it immediately and call your local authorised Canon dealer or help line.
JThe back and bottom of the MultiPASS C50 include slots and openings for ventilation. To keep the MultiPASS C50 from overheating (which can cause it to operate abnormally and create a ®re risk), take care not to block or cover these openings. Do not operate the unit on a bed, sofa, rug, or other similar soft surface, or near a radiator or other heat source. Do not place the MultiPASS C50 in a cupboard or cabinet or on shelves unless adequate ventilation is available. See ºChoosing a Location for Your MultiPASS C50º on page
JOperate the MultiPASS C50 only from the type of power source indicated on the unit's label. If you are not sure of the type of power available from your wall outlets, contact your local power company.
JMake sure the total amperage used by all devices plugged into the wall outlet does not exceed the ampere rating of the outlet's circuit breaker.
JDo not allow anything to rest on the power cord or place the MultiPASS C50 where the cord will be walked on. Make sure the cord is not knotted or kinked.
| Chapter 1 |
