JIf the call is from a fax machine, the MultiPASS C50 receives the fax automatically.
JIf the call is a telephone call, the MultiPASS C50 rings to alert you to pick up the handset. If you do not pick up the handset within 22 seconds, the MultiPASS C50 stops ringing, checks again to make sure the call is not from a fax machine, then hangs up. (You can use the MultiPASS Desktop Manager to change the 22 seconds, increasing the amount of time the MultiPASS C50 rings before it hangs up.)
JNot all fax machines are capable of sending a FAX TONE. For those cases you can set your MultiPASS C50 to switch to receive mode automatically and start receiving the document. If no document comes in, it disconnects after approximately 35 seconds. See the MultiPASS Desktop Manager User's Guide for instructions on setting this switch.
JIf the MultiPASS C50 runs out of paper or if its BJ cartridge runs out of ink while the unit is receiving a fax, it receives the remainder of the fax into its memory.
JTo stop receiving a fax before it is complete, press the 
(STOP) button.
JIf the ALARM light ¯ashes, make sure the error is corrected and then press the 
(STOP) button. See ºThe Alarm light comes on.¼º under ºPrinting Problemsº on page
Chapter 5 | Receiving Faxes |
