Printing Problems
If you are having problems printing with the MultiPASS C50, check the problems and solutions listed in the following table.
Problem | Possible cause | Solution |
The ALARM light comes on and the MultiPASS C50 beeps while printing
The MultiPASS C50 may have a paper jam.
Clear any paper jams as described above.
If the MultiPASS C50 has no paper jam, unplug it, wait 5 seconds, then plug it in again. If the problem is ®xed, the ALARM light will be off, the BJ cartridge will move to its home position, and the LCD display will show the time and receiving mode (standby mode).
If the ALARM light stays on, call your local authorised Canon dealer or the Canon help line.
Chapter 8 | Troubleshooting |
