Transporting the MultiPASS C50
Whenever you plan to transport the MultiPASS C50, you need to prepare it so it will not be damaged during the move.
1.Do NOT remove the BJ cartridge from the unit.
2.Make sure the cartridge holder is in its home position at the right side of the unit.
J If it is not in its home position, press the CARTRIDGE button.
3.Disconnect the power cord.
4.Tape the cartridge holder in place.
5.Disconnect the optional handset, extension phone or answering machine (if using them), the telephone line, and the parallel cable to the PC.
6.Remove the sending document support, document support for scanned documents, and output tray extension. See ºAttaching Componentsº on page
7.Remove the optional handset if you have attached it to the MultiPASS C50. See Appendix B.
8.Replace all tapes and shipping materials you removed when you ®rst unpacked the MultiPASS C50. See ºRemoving Shipping Materialsº on page
9.Pack the MultiPASS C50 and all its components into its original shipping carton. Use the illustration on page
If you no longer have the shipping carton your MultiPASS C50 came in, pack the unit in a suitably sized, sturdy cardboard box, using bubble wrap, foam peanuts, or other suitable packing materials.
Chapter 9 | Maintaining Your MultiPASS C50 |
