Canon MultiPASSTM C50 manual Sending Documents, Manual Sending via the Handset, Memory Used 0%

Sending Documents

This section describes how to send faxes with the MultiPASS C50.

Manual Sending via the Handset

If you have the optional handset or an extension phone connected to your MultiPASS C50, you can send faxes manually. This allows you to talk to the other party before sending the fax, which can be useful if the other party uses a single line for both voice and fax transmissions.

Be sure to adjust the document feed lever before loading your document. See page 6-5 for details.

1.Prepare the document and load it, face down, into the Automatic Document Feeder (ADF).

J Once the document is loaded, the LCD display shows the following:

MEMORY USED 0%

(Currently used image memory)

STANDARD

(Current resolution)

DOCUMENT READY

(Standby to scan)

JIf necessary, you can adjust the resolution and contrast. See page 4-3 for details.

2.Lift the handset, and dial the number.

LINE IN USE

Ex:

TEL=15037537984

JUse one of the dialling methods described on page 4-7.

4-8 Sending Faxes Chapter 4