Installing the BJ Cartridge
To install your BJ cartridge, follow these steps: 1. Make sure the MultiPASS C50 is plugged in.
CARTRIDGE | 2. Press CARTRIDGE. |
| J The cartridge holder moves toward the centre of the unit. |
3. Open the printer cover by grasping the document guides and lifting.
JDo not try to manually move or stop the cartridge holder, or you may damage
the MultiPASS C50.
JDo not touch the ribbon cable, the small circuit board, the guide rail or the round shaft.
CIRCUIT BOARD
GUIDE RAIL
ROUND SHAFT
RIBBON CABLE
Chapter 2 | Setting Up Your MultiPASS C50 |