Canon MultiPASSTM C50 manual Cleaning the MultiPASS C50s Exterior

Cleaning the MultiPASS C50

Clean your MultiPASS C50 regularly to keep it in good operating condition.

Follow these precautions whenever you clean the MultiPASS C50:

JWhen the power cord is disconnected, the image memory is completely erased. Therefore, before you begin cleaning the MultiPASS C50, be sure to print any faxes stored in its memory. If REC'D IN MEMORY or RECEIVED IN FILE appear in the LCD display, follow the steps on pages 5- 10 or 5-12 to print out the documents.

JIf you disconnect the MultiPASS C50 while it is waiting to send a document, you will have to set the MultiPASS C50 to send your document again once you ®nish cleaning the unit.

JDo not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the components or generate static charges.

Cleaning the MultiPASS C50's Exterior

Clean the MultiPASS C50's outer casing as follows.

1.Disconnect the power cord from the MultiPASS C50.

2.Wipe the MultiPASS C50's exterior with a clean, soft, lint-free cloth moistened with water or diluted dishwashing detergent solution.

Never use thinner, benzene, alcohol, or any other organic solvent to clean the MultiPASS C50, as these can damage the MultiPASS C50's surface.

3. Plug the power cord back in.

Cleaning the MultiPASS C50's Interior

To prevent ink spots and paper dust from accumulating inside the MultiPASS C50 and affecting print quality, clean the unit's print area periodically as follows.

9-2 Maintaining Your MultiPASS C50 Chapter 9