Redialling-automatic
When the fax you dial does not answer or a sending error occurs, the MultiPASS C50 waits for a speci®ed interval and then redials the same fax number. You can adjust the number of redials and the length of time between redialling.
Redialling-manual
When you use the regular dialling method, you can quickly call the last number dialled by pressing the 
(REDIAL)/PAUSE button.
Reduction mode
The MultiPASS C50's automatic feature that slightly reduces the received image to allow room at the top of the page for the sender's ID information. You can also reduce the size of large incoming documents using the Reduction option in the Receive Fax tab.
Registering
A process by which you place fax or telephone numbers and names in the MultiPASS C50's memory for automatic dialling so that you can save time dialling frequently called destinations. See Address Book.
Regular dialling
Pressing the individual numeric buttons to dial a fax or telephone number.
Remote receiving ID
The
Remote reception
Activating a fax by answering an extension telephone that is connected to the MultiPASS C50, but that is not located near the MultiPASS C50. You need to dial a remote receiving ID number to start remote reception.
Reports
A document printed by the MultiPASS C50 and containing information about the faxes it has sent or received.
Reset
A way to clear printer errors; turn the printer mode off and then back on again.
Glossary |
