Canon MultiPASSTM C50 manual Ringer Switch, TONE/PULSE Switch, # Button

AR Button

This button can be used when the handset is connected to a PABX or a System 'X' exchange. The R button is used to obtain a second line to the PABX while holding the original line (for example, when transferring a call from one extension to another or when using some of the new features of the System 'X' exchange*). See your PABX user guide, or contact your service provider for details. See also page 4-20 of this user's guide.

This telephone has two methods of recall:

JEARTH (ETH): EARTH LOOP RECALL

JBREAK (TLB): TIMED BREAK RECALL

Use the ETH/TLB switch to select the recall method you wish to use.

BRinger Switch

The ringer switch allows you to select the ring volume of the handset for incoming calls. Set to HI, LO, or OFF according to your preference.

CTONE/PULSE Switch

The handset is designed to operate on both Multi-Frequency (Tone) and Loop Disconnect (Pulse) telephone lines.

The tone/pulse switch enables you to switch from tone dialling to pulse dialling or vice versa. Contact your service provider for further information.

Use a pointed instrument to set this switch to P (pulse dialling) or T (tone dialling).

DNumeric Buttons

Use the numeric buttons to dial the number of the party you wish to call.

*Button

Press this button to enter a pause between numbers. (For pulse dialling only.)

# Button

Press this button to redial the last number you called. (For pulse dialling only.)

*System 'X' exchange features include THREE WAY CALLING, and CALL WAITING.

Appendix B Options B-7