Adjusting the Volume of the Operator Alert Assembly
The operator alert assembly has the following main parts:
v
vVolume control
vExternal contacts that allow you to connect an alert signal of your choice. See ªConnecting an Accessory to the Operator Alert Contactsº on page 101 for details.
To change the volume on the printer operator alert assembly, do the following:
1.Locate the knob at the base of the operator alert assembly.
2.To increase the volume, turn the knob clockwise.
3.To decrease the volume, turn the knob counterclockwise.
4.Test the alarm volume by opening the transfer assembly.
5.Repeat steps 2 and 3 until you have adjusted the volume to the desired level.
