Puller Control Lever

The puller lever is on the left side of the input area. When you press the lever, pressure is released on the scuff and backup rollers inside the fuser area. The lever is spring-loaded, so pressure returns to the scuff and backup rollers when you release the puller lever.

Fuser Entry Area

After they receive print images, the forms pass through the fuser entry area toward the fuser.

In the fuser area, heat and pressure from the fuser heat-roll bond the print images onto the forms.

26InfoPrint 3000 Operator's Guide

Page 58
Image 58
IBM 3000 manual Puller Control Lever, Fuser Entry Area