IBM 3000 manual Unloading the Stacker, Forms Length

Unloading the Stacker

Do this task when you need to remove printed forms from the stacker or when you see the following message:

STACKER FULL 0796

Some controls you need to use to accomplish this task are available only on the stacker control panel, and some are available on the Display Touch Screen window.

1.If you need to stop the printer, SELECT the Stop pushbutton on the Display Touch Screen window.

2.If you need to remove all the current forms from the forms path, separate the forms at a perforation below the transfer station. Ensure that the end-of-forms sensors are uncovered. Open the static brush so the forms fall back into the box or input area.

3.If you need to move forms to the stacker, SELECT the NPRO pushbutton on the Display Touch Screen window.

If END OF FORMS appears, repeat this step again.

Table Forms

Feed

UpForward

STOPREADY

DownStop

Forms Select

A 16-22 lbs(51-71kg)60-82g

B 23-42 lbs(72-135kg)83-157g

C Plastic

Forms Length

7	8	9	10	11	12	13	14
0		1/3		1/2		2/3

HC6OG026

4.On the stacker control panel, press the stacker table Down switch and wait for the stacker table to stop moving.

Chapter 6. Operator Responsibilities 169