IBM 3000 manual Operator Tip

10.Roll the upper roll down against the lower roll.

11.Holding both rolls, press the lower oiler-belt roll to the right against the spring.

12.Remove the lower oiler-belt roll by removing the left end ®rst.

13.Place the old oiler belt on several thicknesses of absorbent material, such as paper towels.

14.Remove the new oiler belt from its carton, saving the plastic bag for the old oiler belt.

Operator Tip

The oiler-belt roll with the most material is the upper roll. The notched end of the roll is the right side (nearest the printer).

Chapter 7. Ordering and Replacing Supplies 209