Enabling a Host Attachment

1.From the Options pull-down menu, SELECT the Enable/Disable Attachments procedure.

2.From the list of currently installed attachments, SELECT the attachment you want to enable, then SELECT the Enable pushbutton.

3.Make the printers Ready.

vIn duplex mode, SELECT the Ready pushbutton on the Display Touch Screen main window.

vIn dual simplex mode, SELECT the Ready pushbutton on the target printer Display Touch Screen window.

vIn simplex mode, SELECT the Ready pushbutton on the Display Touch Screen window.

Disabling a Host Attachment

1.From the Options pull-down menu, SELECT the Enable/Disable Attachments procedure.

2.From the list of currently installed attachments, SELECT the attachment you want to disable, then SELECT the Disable pushbutton.

3.If you want the printer active for attachments that are not disabled, choose one of the following methods:

vIn duplex mode, SELECT the Ready pushbutton on the Display Touch Screen main window.

vIn dual simplex mode, SELECT the Ready pushbutton on the target printer Display Touch Screen window.

vIn simplex mode, SELECT the Ready pushbutton on the Display Touch Screen window.

64InfoPrint 3000 Operator's Guide

Page 96
Image 96
IBM 3000 manual Enabling a Host Attachment