Checking the Forms Alignment
Do this task when you see a CHECK FORMS ALIGNMENT message or whenever you load, splice, or adjust forms.
|
| HC6OG094 |
| 1. | At the upper rear transfer station tractor cover plate, ensure that the forms |
|
| perforation is aligned with the correct forms length. |
| 2. | If the forms perforation is not aligned correctly, do the following: |
|
| a. Use the Forms Feed key on the Printer Control Panel to adjust the position |
|
| of the perforation. |
3. | If you are using the | |
| the Printer Control Panel is set to match the fold direction of the ®rst fold | |
| perforation below the perforations on the forms guide. | |
| 4. | If you are doing this procedure as a step in a Printer Error or Intervention |
|
| Required procedure, continue with the steps in that procedure. |
| 5. | If you are doing this when you load, splice, or adjust forms, SELECT the |
|
| Ready pushbutton on the Display Touch Screen window for the affected printer |
|
| to continue processing. |
