IBM 3000 Conguring Preprocessing/Postprocessing Devices/Interfaces, Port Conguration Options

Con®guring Preprocessing/Postprocessing Devices/Interfaces

This procedure lets you add, delete, or change speci®cations for preprocessing and postprocessing device interface features. You may con®gure and store up to ten de®ned preprocessing/postprocessing devices, each con®gured for either Printer 1 or Printer 2. But only three devices may be enabled for each printer. The printers have three interface ports. These ports may be equipped with Preprocessing/Postprocessing (Pre/Post) or Advanced Function Postprocessing (AF Post) interfaces as shown in Table 22. Port 1 comes standard with a Pre/Post device interface adaptor, and the following table assumes that adaptor is installed.

Table 22. Preprocessing/Postprocessing Interface Options

Port			Con®guration Options
1	Pre/Post	Pre/Post	Pre/Post	Pre/Post	Pre/Post	Pre/Post
2	Ð	Pre/Post	Pre/Post	AF Post	Pre/Post	AF Post
31	Ð	Ð	Pre/Post	Ð	AF Post	Pre/Post

1 Port 3 is not available on Model ES1.

The procedure for changing your pre/postprocessor con®guration follows:

1.Do one of the following:

v In duplex or simplex mode, SELECT the Con®gure pull-down menu on the main Display Touch Screen window. You can work with all con®gured preprocessing and postprocessing devices.

vIn dual simplex mode, SELECT the Con®gure pull-down menu on the Display Touch Screen window of the printer with which you want to work. You can work with only the preprocessing and postprocessing devices that are con®gured for that printer.

2.SELECT the Con®gure Pre/postprocessors procedure. You see the Con®gure Pre/postprocessors window, which lists the device interfaces that are currently de®ned and installed.

Chapter 8. Con®guring the System 241