Table 12. Jam Recovery Procedures - Simplex Mode (continued)

Error Message SRC Code (In Numeric

 

 

Order)

 

 

Recovery Actions

 

 

 

 

UPPER TRACTOR FORMS JAM

0119

If you do not ®nd a forms jam, do the following:

TENSION ARM DOWN

0131

1.

 

a. Be aware that dark-colored backing on the forms can cause the

TENSION ARM

UP

0132

 

SKEW ERROR

0133

 

 

 

printer to display these messages.

FUSER WRAP

0134

 

 

b.

The message UPPER TRACTOR FORMS JAM 0119 may appear if the

(Forms are NOT jammed, torn, or

 

printer engine top cover is open and allowing light to affect an

 

optical sensor. Ensure that the top cover is closed.

separated.)

 

 

 

 

 

 

 

c.

Clean the upper tractor jam sensor. See step 16 on page 93.

 

 

 

 

2.Open the upper tractor covers and ensure that the tractor holes align with the tractor pins.

3.Hold down the tension arm while you do the following:

a.Use the Forms Feed switches on the printer control panel to align the form perforation of the ®rst full page with the correct length alignment mark on the rear tractor cover. See Figure 27 on

page 130 for details.

b.SELECT the Table Up pushbutton on the stacker control panel to make the forms taut.

4.If any of the Printer Error messages are still displayed, SELECT the Check Reset pushbutton on the Printer Error Display Touch Screen window.

5.Check for and resolve or postpone any other error or intervention message appearing on the Display Touch Screen windows.

6.Check to ensure that the perforation is aligned at the correct forms length of the tractor station alignment scale and adjust if necessary.

7.SELECT the Ready pushbutton on the Display Touch Screen window.

8.If reprinting is allowed, all unfused pages between the transfer station and the top of the stacker plus any jam recovery point distance de®ned in the printer con®guration are reprinted. Check for and discard duplicate pages.

9.If reprinting is not allowed, work with the host system console operator to recover the lost pages.

10.See ªSuggestions for Preventing Jamsº on page 144 if the error recurs frequently.

124InfoPrint 3000 Operator's Guide

Page 156
Image 156
IBM 3000 manual Forms are not jammed, torn, or, Separated