To Change the Password or Authorization Level, do the following:
1.From the Options
Operate | Configure | Analyze | Options | Help |
Assign Form to Load...
Enable/Disable Attachments...
Password...
Change Language...
Clean Screen...
Calibrate Touch Screen...
Front Face...
Special Features...
Ready | Check Reset | NPRO | Cancel Job |
HC6OG091
Figure 23. Options Pull-Down Menu
2.To change the Authorization Level, SELECT the Authorization Level to which you wish to change.
If you are not changing to the Operator level, then the Password Keypad window appears. Enter the password, and SELECT the OK pushbutton.
3.To change a password, ®rst SELECT the Authorization Level you wish to change. Then do the following:
a.If you select a level that the system is not currently in, the Password Keypad window appears. Enter the password, and SELECT the OK pushbutton.
b.When the Password window returns, SELECT the Change pushbutton. The Password Keypad window appears.
c.Enter the new password and SELECT the OK pushbutton to change the password.
If you decide not to change the password, SELECT the Cancel pushbutton.
