IBM 3000 Forms Length and Width Controls

Forms Length and Width Controls
Using This Control: Does This:
FORMS WIDTH
1
Increases or decreases the stacker width setting. Youcan set this
lever from 8 to 18 inches in increments of ¼inch.
FORMS LENGTH
2
Increases or decreases the stacker length setting. Youcan set the
forms length from 7 to 14 inches. The length increases or decreases
in increments of one-third and one-half inch. Youturn the knob
clockwise to increase the forms length. Youturn the knob
counterclockwise to decrease the forms length.
The length you set with the FORMS LENGTH knob is indicated by
the LEDs on the Stacker Control Panel.
30 InfoPrint 3000 Operator’s Guide