Table 13. Printer 1 Jam Recovery Procedures - Duplex Mode (continued)

Error Message SRC Code (In Numeric

Recovery Actions

Order)

 

 

 

 

 

UPPER TRACTOR FORMS JAM 0119

1. If you do not ®nd a forms jam, do the following:

TENSION ARM DOWN 0131

 

a. Be aware that dark-colored backing on the forms can cause the

TENSION ARM UP 0132

 

SKEW ERROR 0133

 

printer to display these messages.

FUSER WRAP 0134

 

b. The message UPPER TRACTOR FORMS JAM 0119 may appear if the

(Forms are NOT jammed, torn, or

 

printer engine top cover is open and allowing light to affect an

 

optical sensor. Ensure that the top cover is closed.

separated.)

 

 

c. Clean the upper tractor jam sensor. See step 16 on page 93.

 

 

 

2.

Open the upper tractor covers and ensure that the tractor holes align

 

 

with the tractor pins.

 

3.

Check to ensure that the perforation on both Printer 1 and Printer 2

 

 

are aligned at the correct forms length of the rear tractor alignment

 

 

scale; adjust if necessary. See Figure 27 for details.

 

4.

If any of the Printer Error messages are still displayed, SELECT the

 

 

Check Reset pushbutton on the Display Touch Screen window.

 

5.

Check for and resolve or postpone any other error or intervention

 

 

message appearing on the Display Touch Screen windows.

 

6.

If necessary, enter the Thread/Align Forms procedure (see ªForms

 

 

Are Loaded Through Both Printersº on page 154).

 

7.

Complete the Thread/Align Forms procedure.

 

8.

SELECT the Ready pushbutton on the Display Touch Screen window.

 

9.

If reprinting is allowed, all unfused pages between the transfer

 

 

station in Printer 1 and the top of the stacker plus any jam recovery

 

 

point distance de®ned in the printer con®guration in Printer 2 are

 

 

reprinted. Check for and discard duplicate pages.

 

10. If reprinting is not allowed, work with the host system console

 

 

operator to recover the lost pages.

 

11. See ªSuggestions for Preventing Jamsº on page 144 if the error recurs

 

 

frequently.

 

 

 

HC6OG094

Figure 27. Reestablishing Forms Alignment

130InfoPrint 3000 Operator's Guide

Page 162
Image 162
IBM 3000 manual Reestablishing Forms Alignment