IBM 3000 manual Forms Feed, Forms Select

Using This Control: Does This:

Moves the stacker table up.

Stops the movement of the stacker table.

Moves the stacker table down.

Forms Feed	Advances the forms to allow them to stack with the original folds
	at the perforations.
	Note: You use the NPRO pushbutton on the Display Touch Screen
	to advance the forms for separation.

Forms Select	Sets the weight or kind of form to be used, as well as the fusing
	temperature and the amount of fuser oil used during printing. The
	current selection is indicated by an LED. Not setting Forms Select
	correctly can reduce print quality.
	v The A setting is for 16-22 lbs (60-82 g/m 2) weight forms. It
	should not be used for heavier weight forms.
	v The B setting is for 23-42 lbs (83-157 g/m2) weight forms. It uses
	more fuser oil than setting A and should not be used for lighter
	weight forms.
	v The C setting lowers the fuser temperature and should be used
	when printing adhesive labels or other special composition
	forms.

Chapter 3. Functional Areas 29