
Options Pull-Down Menu
Figure 14 shows the selections available on the Options pull-down menu.
Operate | Configure | Analyze | Options | Help |
Assign Form to Load...
Enable/Disable Attachments...
Password...
Change Language...
Clean Screen...
Calibrate Touch Screen...
Front Face...
Special Features...
Ready | Check Reset | NPRO | Cancel Job |
HC6OG091
Figure 14. Options Pull-Down Menu
Assign Form to Load...
Assigns the de®ned name of the form you are loading. (A form does not appear on the list until you de®ne it.) From within this procedure, you can also invoke the Adjust Print and Print Test procedures. See ªLoading Forms (Simplex or Dual Simplex Mode)º on page 102 or ªLoading Forms (Duplex Mode)º on page 115 for more information.
Enable/Disable Attachments...
Lets you enable and disable the host system attachments that are installed on the system. See ªEnabling and Disabling Attachmentsº on page 63 for more information.
Password...
Lets you set the authorization level of the person who is working on the printer. It also allows you to change the user authorization password. Access to higher user authorization levels is password protected. See ªChanging the Password or Authorization Levelº on page 79 for more information.
Change Language...
Lets you change the language that is used for all text within Display Touch Screen windows. See ªChanging the Language of Messagesº on page 218 for more information.
Clean Screen
Gives you 30 seconds to clean the face of the monitor. If one 30 second interval is not long enough, you can repeat this procedure as many times as necessary.