NPRO
NPRO Page
Moves the forms forward to the next
Shutdown/Restart
Lets you shutdown or restart the printers.
vShutdown closes all of the active procedures, disables host attachments, and safely prepares the system so that you can power off the control unit. In duplex mode, Shutdown affects the complete system. In simplex or dual simplex mode, Shutdown applies to just the printer for which the procedure was selected. You can still use the other printer.
vRestart unloads and then reloads the control unit internal code. This resets pointers, counters, and other controls. In duplex mode, the complete system (both printers) undergoes a Restart. In simplex or dual simplex mode, the Restart applies only to the printer you are restarting. You can still use the other printer.
See ªShutting Down and Restarting the Systemº on page 61 for more information.