IBM 3000 manual Conguration Item Description Value Options

Table 16. Printer Con®guration Items (continued)

Con®guration Item	Description	Value Options
Fuser Inactivity	This entry sets the time, in hours, of printer inactivity	0 to 9 hours. Default is 1 hour.
Timer	before the fuser is turned off. This saves electrical power
	costs and extends the life of the printer. The fuser
	automatically turns on when printing resumes, with a
	delay until the fuser has reached operating temperature.
	A value of 0 means that the timer is not used.
Eject to Front Facing	This entry allows accepting or rejecting the Eject to Front	Yes or No
	Facing (EFF) signals sent by the host. A No value will
	suppress EFFs. If Yes, the EFF signal from the host will
	cause a blank page to be inserted between print jobs if
	the prior job contained an odd number of pages.
	This option should be set to No if either a postprocessing
	device is installed that bursts and stacks output pages, or
	if Direct Attach is set to Yes.
Form De®nition	When selected, the form de®nitions are listed in the order	Yes or No
Order	that they were entered.
Stacker Enabled	This entry allows setting of whether or not the stacker is	Yes or No
	to be used. A setting of Yes implies that a postprocessing
	device is not being used and that fanfold forms (not
	roll-feed forms) are being used.
	However, if a postprocessing device is installed and
	enabled, a Yes value is ignored.
	In duplex mode, it refers only to the Printer 2 stacker. In
	dual simplex mode, it may refer to either Printer 1 or
	Printer 2.

Chapter 8. Con®guring the System 225