IBM 3000 manual Changing the Fine Filter

Changing the Fine Filter

Attention!

You may leave printer power on while you perform this task, but the printer should not be printing.

To clear this action message, the printer power must be on while you replace the ®ne ®lter.

Do this task when you see the following message:

CHANGE FINE FILTER 0791

Note: You do not have to replace the ®ne ®lter the ®rst time you see the CHANGE FINE FILTER message. To bypass the message, SELECT the Ready pushbutton on the main Display Touch Screen.

The CHANGE FINE FILTER message reappears each time end-of-forms is reached, an error condition occurs, or every 4 000 feet of forms thereafter. When 100 000 additional feet of forms have been processed since the message originally appeared, you must change the ®ne ®lter before you can return the printer to Ready status.

1.Locate a new ®ne ®lter.

2.From the rear of the printer, open the rear center cover.

Chapter 7. Ordering and Replacing Supplies 201