1.From the Operate
2.On the Shutdown/Restart procedure window, SELECT the Shutdown pushbutton.
If you decide that you do not want to shutdown or restart the system, SELECT the Cancel pushbutton.
If the printers are in duplex mode, or if the printers are in dual simplex mode and the ®nal simplex printer is being shutdown, the following messages appear:
v The message Shutdown in Progress appears after you select the Shutdown pushbutton.
v Shutdown Complete appears when the shutdown process is complete.
3.If necessary, switch power off to the system or the individual printer. See ªControlling the System Powerº on page 56 for details.
As required, correct the problem that caused you to initiate the procedure.
Restarting the System
Note: In duplex mode, this procedure applies to the complete system (both printers). In dual simplex mode, this procedure applies to the target printer only.
1.From the Operate pull-down menu, SELECT Shutdown/Restart.
2.On the Shutdown/Restart procedure window, SELECT the Restart pushbutton.
3.Enable the host attachments, if necessary. See ªEnabling and Disabling Attachmentsº on page 63 for details.
4.Try the operation that was in progress when the Restart was requested again.
