IBM 3000 manual Ordering and Replacing Supplies

11.Close the toner cartridge latch (1).

12.Place the carton lid on the lower lip of the toner hopper with the edge of the carton lid under the upper lips of the toner hopper.

13.Remove the cartridge seal from the toner cartridge by ®rmly pulling on the tab and rolling it under the seal until the seal is completely removed. Place the rolled seal in the carton lid.

14.Remove the carton lid from the toner hopper. Discard the carton lid, the cartridge seal, and the carton with the used toner cartridge.

15.Clean any spilled toner.

16.Go to ªChanging the Toner Collectorº on page 188 to change the toner collector.

Chapter 7. Ordering and Replacing Supplies 185