IBM 3000 manual Adding Fuser Oil

Adding Fuser Oil

Attention!

You may leave printer power on while you perform this task, but the printer should not be printing.

Using the wrong fuser oil can cause print quality problems. See Table 15 on page 177 for the correct part number.

Do this task when you see the following message:

ADD FUSER OIL

You need the following items when you add fuser oil:

vFuser oil bottle

vPlastic spout (which is packaged with the oil)

vPaper towels.

Note: You do not have to replace fuser oil the ®rst time you see the ADD FUSER OIL message. To bypass the message, SELECT the Ready pushbutton on the main Display Touch Screen.

The ADD FUSER OIL message reappears each time end-of-forms is reached, or every 4 000 feet of forms thereafter. When 50 000 additional feet of forms have been processed since the message originally appeared, you must add fuser oil before you can return the printer to Ready status.

Chapter 7. Ordering and Replacing Supplies 179