Jams Between the Printer and a Postprocessing Device
Jams or separated forms that occur between the printer and the postprocessing device are not detected and presented as form jams. The usual error condition presented is a Pre/postprocessor NOT READY line became active D204 message. This error message occurs when the ªPre/postprocessor Busy Timerº (see ªCon®guring Preprocessing/Postprocessing Devices/Interfacesº on page 241 for details) has timed out.
1.Clear the forms path of any jam, or clear any
2.SELECT the Check Reset pushbutton on the Printer Error Display Touch Screen window.
3.Make the postprocessing device Ready.
4.If you have to remove damaged or separated forms in the forms path, you must rethread the postprocessing device.
5.SELECT the Ready pushbutton on the Display Touch Screen for the affected printer.
6.If you want to reprint pages, SELECT the Jam Recovery pushbutton on the Intervention Required window.
7.SELECT the Completed pushbutton on the Intervention Required window. (You do not have to wait between SELECTING the Jam Recovery and Completed pushbuttons.)
8.SELECT the Ready pushbutton on the Display Touch Screen.
For jams in a postprocessing device, see ªRecovering from a Forms Jam in the Postprocessing Deviceº on page 135.