IBM 3000 manual Do on page 103 through on page 110 under ªLoading Forms

3.	Do step 1 on page 103 through step 26 on page 110 under ªLoading Forms
	(Simplex or Dual Simplex Mode)º and return here.
	You now have forms in the stacker of Printer 1.
4.	Use the Forms Feed pushbutton on the Stacker Control Panel as necessary to
	advance enough forms to thread the Buffer/Flipper Unit, the Urge Unit, and
	Printer 2.
5.	Thread the forms through the Buffer/Flipper Unit (2) (see ªThreading the
	Buffer/Flipper Unitº on page 167).
6.	Bring the forms under the control unit of Printer 2 to the Urge Unit (9).
7.	Thread the Urge Unit.
8.	Thread the forms through Printer 2 using steps 1 on page 103 through 37 on
	page 114 of Loading Forms (Simplex or Dual Simplex Mode).
9.	Ensure that the paper in Printer 1 is aligned with the forms scale on the rear
	tractor cover.
10.	Go to the Thread to Align menu to ensure proper alignment. See
	ªThread/Align Formsº on page 152.

116InfoPrint 3000 Operator's Guide