IBM 3000 manual Adjusting the Display Touch Screen Monitor, User Controls

Adjusting the Display Touch Screen Monitor

You may decide that some physical aspect of the information image that is displayed on the face of the monitor needs adjusting. You can adjust the image with the user controls at the bottom of the monitor and the On-Screen-Display (OSD) icons.

User Controls

Figure 17. Operator Console User Controls

The controls at the bottom of the monitor are for the following tasks:

vSwitching the monitor on and off

vAdjusting contrast and brightness

vActivating and adjusting the On-Screen-Display (OSD) control icons.

Table 9 describes the controls and how to use them.

Table 9. User Controls on the Monitor

Using This Control:	Does This:
Power Switch	Switches the monitor on and off.

OSD/Select

Activates the On-Screen-Display and selects a control icon.

Highlight/Adjust

Pops out when pushed. Rotates to highlight OSD icons and adjusts setting after an icon has been selected.

Contrast

Adjusts contrast between foreground and background.

Brightness

Adjusts background brightness.

Chapter 6. Operator Responsibilities 65