
Checking the Fine Filter
Do this task when you see the following message:
CHECK FINE FILTER 0799
Note: You must do this task immediately. You cannot delay it as you can with some Out of Supplies conditions.
1.From the rear of the printer, open the rear center cover.
2.Ensure that the ®lter container is upright in the recessed ®lter area.
3.Ensure that the ®lter cover is ®rmly latched in place.
4.Ensure that the ®lter hose is attached to the ®lter cover.
5.Close the rear center cover of the printer.
6.To resume processing, SELECT the Ready pushbutton on the main Display Touch Screen.
7.If the CHECK FINE FILTER message appears again, repeat steps 2 through 6. If that still does not correct the problem, contact your service representative. See ªService Call Procedureº on page 13 for instructions.