IBM 3000 manual Conguration Item Description Value Options

Table 16. Printer Con®guration Items (continued)

Con®guration Item	Description	Value Options
Beam 5 offset	(See information in Beam 1 offset adjustment)	(See information in Beam 1 offset
adjustment for		adjustment)
Printer 2 (D)
Machine Sequence	(CE Change on Initial Con®guration Only) This is the	N/A
for Printer 1	serial number for Printer 1 (7 numeric only characters).
	Each time the AFCCU hard disk is replaced, this data is
	lost; the CE must enter the serial number found on the
	rear inside of the AFCCU frame again.
Manufacturing Plant	(CE Change on Initial Con®guration Only) This is the	N/A
for Printer 1	code for plant of manufacture of Printer 1 (2 numeric
	only characters). Each time the AFCCU hard disk is
	replaced this data is lost; the CE must enter this code
	again from information saved from the last time Printer
	Con®gurations were changed.
Machine Sequence	(CE Change on Initial Con®guration Only) This is the	N/A
for Printer 2	serial number for Printer 1 (7 numeric only characters).
	Each time the AFCCU hard disk is replaced, this data is
	lost; the CE must enter the serial number found on the
	rear inside of the AFCCU frame again.
Manufacturing Plant	(CE Change on Initial Con®guration Only) This is the	N/A
for Printer 2	code for the plant of manufacture of Printer 2 (2 numeric
	only characters). Each time the AFCCU hard disk is
	replaced, this data is lost; the CE must enter this code
	again from information saved from the last time Printer
	Con®gurations were changed.
Date and Time	(CE Change Only). This is in the form of	N/A
	mmddHHMM.ssyy. mm=month dd=day HH=hour
	MM=minute ss=second yy=year

228InfoPrint 3000 Operator's Guide