IBM 3000 manual Operator Responsibilities

In duplex mode, the forms move through both Printer 1 and Printer 2 to either the stacker on Printer 2 or to a postprocessing device behind Printer 2. In simplex mode, the forms move through the printer to the stacker or to a postprocessing device behind the printer.

If forms have moved to a printer stacker, go to step 6.

If forms have moved to a postprocessing device, go to step 7.

6.Unload the stacker. See ªUnloading the Stackerº on page 169. Perform the Shutdown procedure.

7.Switch off power to the printer. See ªControlling the System Powerº on page 56 for details.

Attention!

Damage to the printer can occur if you do not turn printer power off before you use the vacuum cleaner.

8.Plug a toner-certi®ed vacuum cleaner into a 110 V ac outlet near the printer.

Chapter 6. Operator Responsibilities 89