4085-001
NPA Response
Any reset conditions that cause the loss of resources or a change in emulation requires an NPA response to inform the host computer. See separate specifications on NPA implementation. NPA responses are only given if NPA bidirectional communication is active in the printer.
Loss of Link Data and Link Response
An operator panel reset is the only reset condition which causes the loss of link data.
For all other reset cases, the link remains active and takes data until the link buffer fills.
When an intervention required error condition occurs, the error is fed back immediately to the attached host computer. The link immediately goes busy on intervention required conditions.
Printing Buffer Contents
The print buffer operation is used to print any partial page that is waiting to be printed. This situation occurs when a PCL 5 emulation or PPDS job is sent to the printer, but it doesn’t contain a Form Feed command after the last page. When this situation occurs, the Waiting message is displayed.
To invoke the Print Buffer operation while the Waiting status screen is displayed, follow these steps.
1.Press Menu> or Menu< to enter the menus. The following screen is displayed.
JOB MENU
Reset Printer
2. Press Menu> until the following screen is displayed.
JOB MENU
Print Buffer
